Coalescing filters traps dirt particles and microscopic droplets in a network of glass fibres. The dirt particles remain trapped, but the droplets slide down the fibres & unite or coalesce with other droplets at crossover points. The compressed air pushes the collected liquid to the outside of the filter cartridge where it drips to the bottom of the bowl, & the liquid is removed through a manually opereated drain value.

Microfibre filter cartridges are constructed from borosilicate glass fibres with fluorocarbon resin binders, resistant to water, all hydrocarbon 7 synthetic lubricants. The filter cartridge are self supporting and self gasketing. The filter media in microfibre filter cartridge is about 95% void volume and only 5% fibre volume. The result in an exceptionally low pressure drop and exceptionally high dirt retention capacity.

It is ADVISABLE to use the filter with metallic Bowl Guards for enhanced SAFETY requirements to avoid personal injury and / or property damage.
Available in three port sizes of 1/4 B.S.P. - 3/8 B.S.P. - 1/2 B.S.P.
Maximum pressure 250 PSIG. Maximum temperature 50degree C. Bowl capacity 230ML.
Materials of construction - Body Zinc alloy - Bowl Polycarbonate - Parts Delrin - Seal gaskets Buna.
One pair of Mounting brackets are supplied free with the filter.
Product No.:027 -weight-2.0 kg. And duly packed in card board box with mounting brackets 2.3 kg.
Product No.:027B.G. -weight-2.2 kg. And duly packed in card board box with mounting brackets 2.5 kg.
It is RECOMENDED to install the filter near to the point of use.
Our products are Fully Guaranteed, as they are carefuly planned, inspected and tested for quality at every stage of manufacturing.However, our obligation under this warranty is limited to repair or replacement of the defective product.
All the parts are available, ask for the list of spares.
We have a policy of continual product development and therefore reserves the right to modify products shown in this catalouge, without any notice.